Commander Script To Print To File

Legacy Poster

• 2014年01月15日 16:07

I have a client that currently sends the printer file (for lack of a better term) to another location with the same type of printer.  The other location then drops these files in the spooler and the printer prints them out as expected.  

 

Is there a way to automatically save the output that would normally be sent to the printer to file from Commander?  I know there is a way to do it from the label editor, but I could not find a command script that would allow me to do it automatically.  

 

 

 

0

• 

  Domingo Rodriguez

  版主

  ★ BarTender Hero ★

  • 2014年01月22日 10:22

  If you would better if you send this question to our tech-support department by email. The contact details can be found below:

  http://www.bartenderbarcodesoftware.com/label-software/technical-support.aspx#contact

   

  Include the product key code of your software, the Edition, Version and Build of the software in use, if Commander could be installed on a PC which has access to print to this printer across the network...

  0

請登入寫評論。