Label Printer Print Density Rollback Issue

Njw

• 2024年08月01日 06:11
• 已编辑于

Bartender Version : 2016 R7

The printer properties in the Windows Control Panel are as follows:

A Printer

Model: ZDesigner ZM 300 dpi (ZPL)
Speed: 15.2
Darkness: 25

B Printer

Model: ZDesigner ZT410 300dpi ZPL
Speed: 15.2
Darkness: 25

When printing the Sample.btw label, it prints correctly on the B Printer.

However, after printing on the B Printer, if I print on the A Printer, the label is printed faintly.

Simultaneously, the print density of the A Printer device automatically changes to 15.

The server printer properties have not changed.

To resolve this issue, I launch Bartender Designer, select Sample.btw, click print, choose A Printer, go to Document Properties, change the print density to 25, close, and save. This restores the correct print quality.

But, the same issue occurs again when printing on the B Printer. Is there a way to prevent the print density of the A Printer from rolling back?

0

• 

  Peter Thane

  ★ BarTender Hero ★

  • 2024年08月05日 08:41

  I would suggest replacing the ZDesigner variants of the driver with the Seagull drivers and retest this to see what this does. Although the ZDesigner work without issue in most instances I have occasionally comes across issues that the above switch corrected without any other action.

   

  0

请先登录再写评论。