How To Invert A Label Orientation When Printing To Different Printers

Legacy Poster

• 2012年06月28日 23:28

I've got 2 identical Zebra printers on different production lines, and I need to print the same label definition on both. However, printer "A" needs to print with orientation Landscape and printer "B" needs to print with orientation Landscape 180. How can I set that up without creating 2 different formats? (I'm sending the print jobs through Commander, if that makes a difference).

0

• 

  Shotaro Ito

  ★ BarTender Hero ★

  • 2012年06月29日 02:52
  Hi Jon,
  There's no command to change print direction from Commander I know.
  You can do that from ActiveX / .net SDK, by Orientation property.
  
  Another option is .. there's a setting to not use Printing preference within btw document, and prefer driver's setting.
  
  In Printer properties > Tools tab > driver options > Network settings tab, enable [Share setting between all documents].
  Enable this setting will affect to all documents using the driver.
  
  Haven't tested myself, though.
  
  Actually, simply using 2 different formats are good idea.

  0

请先登录再写评论。