Postal Td896 Of "poste Italiane"
Hi
I'm testing latest release of BT-PRO (10.1.SR3) in order to print Postal TD896 (it is Italian postal like this http://www.cariddipost.it/bollettino-TD-896; here specifications http://www.poste-impresa.it/resources/bancoposta/pdf/pmi/bollettino/Manuale_Stampa_In_Proprio_2014.pdf)
Postal is complete with all data and two barcode:
1) Code 128 AIM USS-128 C (monodimensional barcode)
2) Datamatrix (bidimensional barcode)
After check, Poste Italiane tell me that all barcode are not readable to their scanner
Maybe I did something wrong in configuring both barcode.
Following is requirement of Code 128 taken from Poste documentation:
coding Code 128 AIM USS-128 tipo C
number digit 28, 1 start digit, 25 identification digit, 1 chkdgt, 1 stop digit
width bars and spaces Wide = 0,298mm
bar height HxL about 12mm x 93mm
tolerance width bars and spaces 10%
coding Arabic numerals height digit 2mm (Arial)
attached are screenshots of my configuration in Bartender (Code128-cfg*)
Following is requirement of Datamatrix taken from Poste documentation
coding datamatrix
Error check ECC 200 (Reed-Solomon)
Format rectangular, 16 x 48 cells
dimensions (except quiet zone) two cells per side 15mm x 45mm
pixel/cell 11 (300 dpi)
polarity black or white
attached are screenshots of my configuration in Bartender (Datamatrix-cfg*)
Can U help me to configure correctly barcode in Bartender?
ThankU in advance
-
Hello,
About your issue:
1. Please, note that these screenshots aren't for BarTender v10.1 SR3
2. Which Printer are you using? Do you have Seagull Printer Drivers? If yes can you let me know which version?
3. Can you please try to print with a different printer? Perhaps your printing issue is due to a driver issue.
4. I've tried to print a barcode Code128 with these specifications and it was properly scanned. I've attached you the file
5. Can you attach your BarTender label file?
Thanks,
Carlos
0
请先登录再写评论。
评论
1 条评论