Printing Doesn't Stop After End Of Series Is Reached
We use BarTender 9.4 SR1 on Windows 7 Professional in connection with an Avery Dennison AP 5.4 300 DPI printer.
When we print 1000 labels with decrementing numbers the printing won't stop after the software has reached 1000 labels.
After testing with 10, 20 and 100 labels the printer stopped after all labels were printed like it's supposed to do. But whenever we try to print more than say 200 labels the printer resets automatically to the first number and then starts printing again. With the same exact starting number and counting down to whatever number we specified.
I've checked everything and I can not seem to find the error. The rollover feature is disabled and I don't find anything else that would tell the printer to print more than one copy of the needed labels.
Any help is greatly appreciated.
-
That's strange. You are using Seagull drivers with the Avery printer?
0 -
No, we use the official Avery drivers.
Could they cause the problem?
0 -
It's always best to use Seagull drivers if possible with BarTender. See the Avery drivers here:
http://www.bartenderbarcodesoftware.com/drivers/avery%20dennison-windows-printer-drivers.aspx
0
请先登录再写评论。
评论
3 条评论