Printing issue after upgrade to 11.8 from 11.3

Solly Beukes

• 2025年12月29日 16:18

Hi all, looking for some advice on what to check.

Have an issue with printing after upgrading from v11.3 to 11.8, after the upgrade print jobs are being doubled but nothing in the print drivers pointing to print jobs being two. Also upgraded the drivers for the printers (Zebra 450) but still nothing changed regarding the print jobs being doubled.

Any advice on what to check or maybe there is a patch I'm missing. Using the print station for the jobs and also have two printers connected to the station with auto print to the relevant printer as each are setup with different size stickers. Note for now that I have reverted back to 11.3 and all working again.

What brakes when upgrading is the auto print according to label being printed and also jobs being duplicated.

0

• 

  Peter Thane

  ★ BarTender Hero ★

  • 2026年01月07日 10:32

  I seem to vaguely recall encountering something like this some years/releases ago but could be wrong.

  I would suggest try printing directly from Designer to see what that does and if that works then re-enable the Printer Selection and Quantity options and test print using those. Again if those work, disable them again and give it another try. 

  0

サインインしてコメントを残してください。