Sometimes it does not print

Thomas Geißler

• 29 mars 2017 07:19

Hallo,

i am using a Zebra Z4M Plus printer, Corel Draw 12, Windows 7 64Bit and the Zebra ZPL-II Driver 7.4.2 on LPT1. Mostly the printing works very well, but sometimes it just does not print. Data is sent to the printer, but only white labels are outputed. Then I restart printer or PC and somehow it works again. Can it be due to the driver settings?

Thank You.

0

• 

  adam cummick

  ★ BarTender Hero ★

  • 3 avril 2017 14:03

  I'd check the document properties (in the print menu) and go to options and set Darkness as an absolute value. The darkness might be getting reset to too light occasionally.

  0
• 

  Thomas Geißler

  ★ BarTender Hero ★

  • 4 avril 2017 07:03

  Thank you, I set the darkness as an absolute value and moved the brightness control all the way to the right, but it's the same problem. First it prints the file, then suddenly no more (the same file and printer settings). After a few reboots it works again.

  0

Vous devez vous connecter pour laisser un commentaire.