Permanent Saved Labels On "intermec Px4I" With Bartender

Legacy Poster

• 29. November 2014 08:24

Hello,

 

first, sorry for my bad english :/

 

I have some question: Is it possible to create a Label in Bartender with variables and to save the Label permanent on a Intermec px4i?

Later i want you call the Label on the Printer with a generic-data stream.

I think it should work, but i don't know how do Transfer the Label to the Printer and how to define the variables.

Is it necessary to have a Pro-Version of bartender? I have only the Ultralight-Version from Intermec-Homepage.

 

i allready made this with a Zebra-Printer, Zebra-Designer and zpl-Commands.

 

the next question is:

how is better and easier to do this?

should i use the zsim-mode on intermec or should i use the DP-mode? I think DP-mode is able to do the same and make it better and easier?

 

the intermec-Printer is a thermo-transfer-Printer with continous forms and a cutter.

 

last i want to start/print from a IBM zos online-Transaction the Labels only by calling the Label and some variables.

 

Thanks for you help.

0

• 

  Shotaro Ito

  ★ BarTender Hero ★

  • 1. Dezember 2014 06:39

  Hi,

  You can create print code from label layout, which called Printer Code Template.

  For DP mode, If your printer supports DP code, you can install Intermec DP driver for the printer.

   

  To use Printer Code Template, from Administer menu > Printer Code Template Setup, create a print system using installed Intermec driver.

  Create a label design on BarTender, then from File > Export printer code template, export the code to single file.

  The printer code can be sent to printer from Printer driver's printer properties > Tools tab > Action > Send file to printer.

   

  I'm not sure export printer code template is enabled in your Ultralite version. If not supported,

  Printer code template is available in BarTender Automation or above.

  Unfortunately I don't know how to store the DP print code in the printer and re-use that.

   

  Actually I recommend to use Commander. Your IBM create flat text file (CSV / tab delimited etc) and drop to a folder.

  Commander detects the file and using that data, automatically print label from BarTender.

  See Commander white paper.

  http://www.seagullscientific.com/label-software/whitepapers/overview-of-commander-new-201406.pdf

  Commander is available from Automation edition.

  0
• 

  Legacy Poster

  ★ BarTender Hero ★

  • 4. März 2015 09:08
  Hi, Sorry but how do you create a print system with an installed intermec driver? I'm currently trying to understand how to export my IPL Printer code template and I'm a little confused insofar I don't know what to choose as print system. It seems that I have to choose between those print systems: SAPscript-ITF / TEC-KB75 / TSC KU-007. But I'm not using none of these devices. Thanks for your help.

  0
• 

  Legacy Poster

  ★ BarTender Hero ★

  • 20. März 2015 12:31

  This may be a question for your Intermec reseller or technical support rather than BarTender. 

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.